lemon-mirror:
Home >> Genesis >> 2021 >> G80 2.5T, RWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Trunk Module >> Power Trunk Module Drive Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Tighten the power trunk module & drive unit mounting bolts.

    Tightening torque: 

    21.6 - 26.5 N.m (2.2 - 2.7 kgf.m, 15.9 - 19. 5 lb-ft)

  2. Connect the control unit connectors.
  3. Install the right trunk trim.
  4. Check that the power trunk operates normally after connecting the negative (-) battery terminal.

    Information 

    1. Make sure that the connectors are plugged in properly.
    2. Check that the power tailgate operates normally.
    CAUTION:
    1. If the drive unit mounting bolt gets lost and it still remains inside the chassis, the rattling noise caused by the bolt may lead to customer complaints.
    2. Reset the power trunk module whenever a job is performed with the battery removed.
    3. Always check for normal operation when a power trunk module related part is changed.

      When abnormal system operation is found, check the DTC Code and the connection of the wiring and cable.

· About lemon-mirror