lemon-mirror:
Home >> Geo >> 1993 >> Prizm Base, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Bench Testing >> Rotor Test

Rotor Test

  1. Using an ohmmeter, check for continuity between rotor and slip rings. See Fig 1 (STEP 1). If continuity exists, replace rotor.
  2. Check for continuity between slip rings. See Fig 1 (STEP 2). If continuity does not exist and resistance is not 2.8-3.0 ohms, replace rotor.
Fig 1: Testing Alternator Rotor (Nippondenso)
G91H02012Courtesy of GENERAL MOTORS CORP.
· About lemon-mirror