lemon-mirror:
Home >> Geo >> 1997 >> Metro Base >> Repair and Diagnosis >> Electrical >> Starter >> Starter - Direct Drive >> Bench Testing >> Commutator Test

Commutator Test

  1. Ensure continuity exists between any 2 commutator segments. If continuity does not exist, replace armature.
  2. Clean commutator segment surfaces with No. 400 grit sandpaper (if necessary). If surface is scored, out-of-round, or pitted, replace commutator.
  3. Using "V" blocks and dial indicator, ensure maximum commutator runout and minimum commutator diameter does not exceed specifications. See STARTER SPECIFICATIONS .
  4. Standard undercut depth for insulating mica should be .016-.024" (.40-.60 mm). Minimum mica undercut depth is .008" (.20 mm). If depth is not within specification, replace armature.
· About lemon-mirror