Mechanical Inspection: Compression
Check engine mechanical condition with a compression gauge, vacuum gauge, or an engine analyzer. See engine analyzer manufacturer's manual for specific instructions.
WARNING:
DO NOT
use ignition switch during compression test. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard, contaminate the engine's oiling system or cause damage to catalytic converter.
Check compression pressure with engine at normal operating temperature, all spark plugs removed, throttle valves wide open and at specified cranking speed. Crank engine at least 6 revolutions to determine engine compression. See ENGINE COMPRESSION .
ENGINE COMPRESSION
| Application | Standard psi (kg/cm2 ) | Minimum psi (kg/cm2 ) | Minimum RPM | |||
|---|---|---|---|---|---|---|
| Civic (1) | 184 (13.0) | 135 (9.5) | 250 | |||
| Civic Del Sol (1) | ||||||
| B16A2 Engine | 242 (17.0) | 135 (9.5) | 250 | |||
| D16Y7 Engine | 228 (16.0) | 135 (9.5) | 250 | |||
| D16Y8 Engine | 228 (16.0) | 135 (9.5) | 250 | |||
|
||||||