lemon-mirror:
Home >> Honda >> 1997 >> Civic del Sol VTEC >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Idle Speed & Ignition Timing

Idle Speed & Ignition Timing

Ensure idle speed and ignition timing are set to specification. See IDLE SPEED SPECIFICATIONS  and IGNITION TIMING  tables. For adjustment procedures, see the ADJUSTMENTS article. Before checking or adjusting idle, ensure MIL has not been reported on, timing is correct, and that spark plugs, air cleaner and PCV system are okay.

IDLE SPEED SPECIFICATIONS

Application RPM
B16A2 Engine (1)
All (2) 400-500
All (3) 650-750
All (4) 700-800
All (5) 760-860
D16Y7 Engine (1)
A/T (6) 650-750
A/T (5) 760-860
M/T (6) 620-720
M/T (5) 760-860
D16Y8 Engine (1)
A/T (6) 650-750
A/T (5) 760-860
M/T (2) 400-500
M/T (3) 620-720
M/T (4) 700-800
M/T (5) 760-860
(1) USA and Canadian models.
(2) With Idle Air Control (IAC) valve disconnected, transmission in Neutral or Park and no load (headlights, blower motor, rear defogger, A/C and cooling fan off). On Canadian models, set parking brake and ensure headlights are off.
(3) Turn ignition off and reset PCM by removing BACK UP (7.5-amp) fuse, located in underhood fuse/relay box for 10 seconds. With Idle Air Control (IAC) valve connected, transmission in Neutral or Park and no load (headlights, blower motor, rear defogger, A/C and cooling fan off). On Canadian models, set parking brake and ensure headlights are off.
(4) Check after one minute with headlights on low.
(5) Turn headlights off and check after one minute with blower motor on HIGH and A/C on.
(6) Check with Idle Air Control (IAC) valve and Intake Air Temperature (IAT) sensor connected, transmission in Neutral or Park and no load (headlights, blower motor, rear defogger, A/C and cooling fan off). On Canadian models, set parking brake and ensure headlights are off.
IDLE CO LEVEL

Application CO Level
Civic Del Sol 0.1%
FAST IDLE SPEED SPECIFICATIONS

Application RPM
Civic Del Sol N/A
IGNITION TIMING - Degrees BTDC - RED MARK @ RPM

Application Specification
B16A2 Engine (1) 14-18 @ 650-750
B16A2 Engine (2) 14-18 @ 700-800
D16Y7 Engine
A/T 10-14 @ 650-750
M/T 10-14 @ 620-720
D16Y8 Engine
A/T (1) 10-14 @ 650-750
A/T (2) 10-14 @ 700-800
M/T (1) 10-14 @ 620-720
M/T (2) 10-14 @ 700-800
(1) USA vehicles.
(2) Canadian vehicles.