lemon-mirror:
Home >> Honda >> 2002 >> S2000 >> Repair and Diagnosis >> Engine Performance >> System >> Pulsed Secondary Air Injection System >> Air Pump Electrical Current Sensor Removal/Installation

Air Pump Electrical Current Sensor Removal/Installation

  1. Pull away the left inner fender as necessary (see INNER FENDER REPLACEMENT ).
  2. Disconnect the air pump electrical current sensor 2P connector (A), and remove the lower cover (B), then disconnect the air pump electrical current sensor 3P connector (C).
    Fig 1: Removing Lower Cover
    G03692905Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the air pump electrical current sensor (D).
  4. Install the sensor in the reverse order of removal.
· About lemon-mirror