lemon-mirror:
Home >> Honda >> 2005 >> CR-V SE >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> CMP Sensor B Replacement

CMP Sensor B Replacement

NOTE: CMP sensor B is on the exhaust side of the cylinder head.
  1. Remove the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION ).
  2. Disconnect the CMP sensor B 3P connector.
  3. Remove CMP sensor B from the exhaust camshaft side of the cylinder head.
    Fig 1: Removing CMP Sensor B From Exhaust Camshaft Side Of Cylinder Head With Torque Specifications
    G03674102Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the sensor in the reverse order of removal with a new O-ring (A).
  5. Do the CKP pattern clear/CKP pattern learn procedure (see CKP PATTERN CLEAR/CKP PATTERN LEARN ).
· About lemon-mirror