lemon-mirror:
Home >> Honda >> 2006 >> CR-V SE >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor Replacement

ECT Sensor Replacement

  1. Remove the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION ).
  2. Disconnect the ECT sensor 2P connector.
  3. Remove the ECT sensor (A).
    Fig 1: Removing ECT Sensor With Torque Specifications
    G03674101Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the sensor in the reverse order of removal with a new O-ring (B).
· About lemon-mirror