lemon-mirror:
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Shift Lever Removal

Shift Lever Removal

  1. Remove the center console (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  2. Shift into N.
  3. Remove the nut securing the shift cable end, then separate the cable end from the shift lever.
    Fig 1: Identifying Shift Cable End With Nut
    G05455386
  4. Rotate the socket holder (A) on the shift cable (B) a quarter turn; the tab (C) on the socket holder will be in the opening of the shift lever bracket base (D). Then slide the holder to remove the shift cable from the shift lever bracket base. Do not remove the shift cable by twisting the shift cable guide (E).
    Fig 2: Identifying Socket Holder, Shift Cable, Quarter Turn; Tab, Shift Lever Bracket Base
    G05455387
  5. Disconnect the shift lock solenoid/park pin switch/ A/T gear position indicator panel light connector (A), then remove the harness clamps (B) from the shift lever bracket base.
    Fig 3: Identifying Shift Lock Solenoid/Park Pin Switch/ A/T Gear Position Indicator Panel Light Connector
    G05455388
  6. Remove the shift lever assembly.
· About lemon-mirror