Power Relay Test: Notes
Use this chart to identify the type of relay, then do the test listed for it.
NOTE:
- For the turn signal/hazard relay input test (see TURN SIGNAL/HAZARD RELAY INPUT TEST ).
- PGM-FI main relay 2 contains a diode between No. 3 and No. 4 terminals. Power (+B) must be connected to the No. 4 terminal, and ground connected to the No. 3 terminal. Failure to test relay correctly will damage the relay and the PCM.
POWER RELAY REFERENCE
| Relay | Test |
|---|---|
| A/C compressor clutch relay | Normally-open type |
| A/C condenser fan relay | |
| Driver's accessory power socket relay | |
| ETCS control relay | |
| Engine mount control relay | |
| Fog light relay | |
| Front blower motor relay | |
| Ignition coil relay | |
| Passenger's accessory power socket relay ('07 model) | |
| PGM-FI subrelay (LAF) | |
| PGM-FI main relay 1, 2 | |
| Power window relay | |
| Radiator fan relay | |
| Rear window defogger relay | |
| Rear blower motor relay | |
| Starter cut relay | |
| Seat heater relay | |
| Adjustable pedal forward relay | Five-terminal type |
| Adjustable pedal rearward relay | |
| Daytime running lights relay (Canada models) | |
| Fan control relay | |
| Moonroof open relay | |
| Moonroof close relay |