lemon-mirror:
Home >> Honda >> 2007 >> Pilot EX, 3.5 YF2 >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 1 Replacement

ECT Sensor 1 Replacement

  1. Drain the engine coolant (see COOLANT REPLACEMENT ).
  2. Remove engine cover (see step 1 under IGNITION COIL REMOVAL/INSTALLATION ).
  3. Disconnect the ECT sensor 1 2P connector (A).
    Fig 1: ECT Sensor 1 With Torque Specifications
    G05593766Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove ECT sensor 1 (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see COOLANT REPLACEMENT ), and bleed air from the cooling system with the heater valve open.
· About lemon-mirror