lemon-mirror:
Home >> Honda >> 2007 >> Ridgeline RT >> Repair and Diagnosis >> Electrical >> Gauges >> Gauges >> Gauge Control Module Replacement

Gauge Control Module Replacement

NOTE: Before replacing the gauge control module, do the "Rewriting the ODO Data and Transferring the Maintenance Minder on a New Gauge Control Module" (see REWRITING THE ODO DATA AND TRANSFERRING THE MAINTENANCE MINDER ON A NEW GAUGE CONTROL  ).
  1. Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  2. Remove the screws from the gauge control module (A), and spread a protective cloth (B) on the upper column cover.
    Fig 1: Identifying Gauge Control Module, Harness Connectors And Fasteners
    G05593104Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the connectors (C), and remove the gauge control module.
  4. Install the gauge in the reverse order of removal.
· About lemon-mirror