lemon-mirror:
Home >> Honda >> 2008 >> Element SC, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Under-Dash Fuse/Relay Box >> Under-Dash Fuse/Relay Box >> Removal

Under-Dash Fuse/Relay Box: Removal

  1. Do the battery terminal disconnection procedure (see DISCONNECTION
  2. Remove the dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  3. Disconnect the connectors from the fuse side of the under-dash fuse/relay box (A).
    Fig 1: Identifying Under-Dash Fuse/Relay Box
    G05451381Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the mounting bolts, and pull the fuse/relay box away from the body.
  5. Disconnect the connectors from the back side of the under-dash fuse/relay box, then remove the under-dash fuse/relay box.
    NOTE: The SRS connector is a spring-loaded lock type (see SPRING-LOADED LOCK CONNECTOR ).
  6. Carefully remove the relays using relay puller
    NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.
· About lemon-mirror