lemon-mirror:
Home >> Honda >> 2008 >> Element SC, Standard >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 2 Replacement

ECT Sensor 2 Replacement

  1. Drain the engine coolant (see COOLANT CHECK ).
  2. Remove the splash shield.
  3. Disconnect the ECT sensor 2 connector (A).
    Fig 1: ECT Sensor 2, Connector And O-Ring With Torque Specifications
    G06267513Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove ECT sensor 2 (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C) coated with clean engine oil, then refill the radiator with engine coolant (see COOLANT CHECK ).
· About lemon-mirror