lemon-mirror:
Home >> Honda >> 2012 >> Insight Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Power Windows) >> Power Window Master Switch Replacement

Power Window Master Switch Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the armrest trim (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Remove the switch panel from the door panel.
  3. Disconnect the 22P connector (A) from the power window master switch (B).
    Fig 1: Identifying 22P Connector And Power Window Master Switch
    G06431644Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the four screws and the switch (A).
  5. Install the switch in the reverse order of removal.
  6. After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT  ).
    Fig 2: Identifying Screws And Switch
    G06431645Courtesy of AMERICAN HONDA MOTOR CO., INC.
· About lemon-mirror