Power Relay Test: Notes

Special Tools Required

Relay Puller 07AAC-000A2A1 or 07AAC-000A1 A0

Use this chart to identify the type of relay, then do the test listed for it.

Relay

Test

A/C compressor clutch relay⁽¹⁾

Normally-open four-terminal type

A/C condenser fan relay⁽¹⁾

PGM-FI subrelay⁽¹⁾

Cargo area accessory power socket relay⁽¹⁾

Console accessory power socket A relay⁽¹⁾

Console accessory power socket B relay⁽¹⁾

Front accessory power socket relay⁽¹⁾

Electronic throttle control system (ETCS) control relay⁽¹⁾

Front blower motor relay⁽¹⁾

Fog light relay⁽¹⁾

Hatch glass relay⁽¹⁾

Ignition coil relay⁽¹⁾

Left second row seat heater relay (HIGH)⁽¹⁾

PGM-FI main relay 1 ⁽¹⁾

PGM-FI main relay 2⁽¹⁾

Power window relay⁽¹⁾

Radiator fan relay⁽¹⁾

Rear blower motor relay

Rear window defogger relay⁽¹⁾

Right second row seat heater relay (HIGH)⁽¹⁾

Starter cut relay 1⁽¹⁾

Starter cut relay 2⁽¹⁾

VTM-4 relay⁽¹⁾

Trailer lighting relay⁽¹⁾

Trailer IG2 relay⁽¹⁾

Active control engine mount (ACM) control relay⁽¹⁾

Five-terminal type

ACC cut relay⁽¹⁾

Fan control relay⁽¹⁾

IG2 cut relay⁽¹⁾

Left second row seat heater relay (LOW)⁽¹⁾

Rear window wiper motor relay 1 (FORWARD)

Rear window wiper motor relay 2 (BACKWARD)

Right second row seat heater relay (LOW)⁽¹⁾

⁽¹⁾	Carefully remove the relay from fuse/relay box using the relay puller. Do not use pliers. Pliers will damage the relay.

Fig 1: Identifying Special Tool

Courtesy of AMERICAN HONDA MOTOR CO., INC.