lemon-mirror:
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 573 (Anti-Lock Brake System And TCS) >> Repair Instructions >> Traction Control Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Traction Control Switch & I/P Assembly
    GM793124Courtesy of GENERAL MOTORS CORP.
  1. Connect the harness connector to the traction control switch (1).
  2. Install the traction control switch (1) into the I/P assembly (2).
  3. Ensure that the switch (1) is secure into both retaining tabs.
  4. Install I/P bezel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument Panel, Gauges and Console.
· About lemon-mirror