lemon-mirror:
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 628 (Wheel Alignment System) >> Repair Instructions >> Front Toe Adjustment

Front Toe Adjustment

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the jam nut on the tie rod (1).
    Fig 1: Loosening Jam Nut On Tie Rod
    GM793269Courtesy of GENERAL MOTORS CORP.
  2. Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Tighten the jam nut on the tie rod.

    Tighten:  Tighten the tie rod jam to 68 N.m (50 lb ft).

  5. Check the toe setting after tightening.
  6. Re-adjust the toe setting if necessary.