Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Strut Assembly & Body Fasteners

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the Strut assembly to the vehicle.
Tighten:
- Tighten the strut to body nuts to 25 N.m (18 lb ft).
- Tighten the strut to body bolt to 25 N.m (18 lb ft).

Fig 2: Steering Knuckle, Strut Bolts & Nuts

Courtesy of GENERAL MOTORS CORP.

Attach the strut to the steering knuckle using new bolts and nuts.
Tighten: Tighten the bolts and nuts to 180 N.m (133 lb ft).
Inspect the stabilizer link seals for damage and replace the link as necessary.

Fig 3: View Of Stabilizer Link & Strut Nut

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Do not allow the stabilizer link ball stud to rotate while installing the link nut.

Connect the stabilizer link to the strut.
Tighten: Tighten the nut to 65 N.m (48 lb ft).

Fig 4: Brake Hose Bracket & Strut Assembly

Courtesy of GENERAL MOTORS CORP.

Install the brake hose bracket to the strut assembly.
Tighten: Tighten the brake bracket bolt to 15 N.m (11 lb ft).
Install the wheel and tire. Refer to Tire and Wheel Removal and Installation .
Lower the vehicle.
Perform a wheel alignment. Refer to Measuring Wheel Alignment .