lemon-mirror:
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Transmission >> Transfer Case - BW 4484 >> Repair Instructions >> Transfer Case Shift Control Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Shift Control/Selector Switch
    GM860516Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) cluster bezel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
  2. Using a flat-tipped screwdriver, gently pry the retaining clips open on the housing.
  3. Slide out the selector switch until the electrical connectors are accessible.
  4. Disconnect the selector switch electrical connectors.
  5. Remove the selector switch from the housing.
· About lemon-mirror