lemon-mirror:
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Body Control Module
    GM832814Courtesy of GENERAL MOTORS CORP.
  1. Install the BCM (1) into the bracket.
  2. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement .
  3. Connect the battery negative cables. Refer to Battery Negative Cable Disconnection and Connection .
  4. Setup the BCM customized options. Refer to Body Control Module (BCM) Programming/RPO Configuration .
  5. Refer to Control Module References  for programming and setup information.
· About lemon-mirror