lemon-mirror:
Home >> Hummer >> 2006 >> H3 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Fuel Tank Module
    GM1564238Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank module. Refer to Fuel Tank Module Replacement .
  2. Disconnect the fuel level sensor electrical connector (1) from the module cover.
    3. Fig 2: Fuel Level Sensor
    GM1564239Courtesy of GENERAL MOTORS CORP.
  3. Complete the following in order to remove the fuel level sensor (1) from the module bucket:
    1. Disengage the locking tabs on the sensor.
    2. Slide the sensor upward from the bucket.
· About lemon-mirror