lemon-mirror:
Home >> Hummer >> 2006 >> H3 Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Tilt Spring Replacement >> Installation Procedure

Installation Procedure

Fig 1: Tilting Column To Up Position
GM293245Courtesy of GENERAL MOTORS CORP.
  1. Tilt the steering column to the UP position.
    Fig 2: Identifying Spring Guide Components
    GM293249Courtesy of GENERAL MOTORS CORP.
  2. Install the spring guide into the tilt spring.
    Fig 3: Installing Tilt Spring Onto The Steering Column Support Assembly
    GM293251Courtesy of GENERAL MOTORS CORP.
  3. Install the tilt spring (1) onto the steering column support assembly (2) and onto the steering column tilt head assembly by using the following procedure:
    • Install the tilt spring (1) onto the steering column tilt head assembly.
    • Install the tilt spring (1) onto the post on the steering column support assembly (2).
  4. Install the steering column trim covers. Refer toSteering Column Trim Covers Replacement 
  5. Enable the SIR system. Refer to SIR DISABLING AND ENABLING
· About lemon-mirror