lemon-mirror:
Home >> Hummer >> 2008 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Data Communications >> Repair Instructions >> Body Control Module Replacement

Body Control Module Replacement

Fig 1: Body Control Module
GM1955110Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Body Control Module

Procedure

  1. Pull tear tape off the wiring harness prior to removing connectors.
  2. Disconnect the electrical connectors.
  3. Press on the tabs to release the body control module.

  4. After serviced use tie strap.
  5. If a replacement module is installed, program the module. Refer to Control Module References
· About lemon-mirror