lemon-mirror:
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 460 (Data Communication System) >> Repair Instructions >> Door Lock Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Door Control Module & Electrical Connectors
    GM754066Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors (1) to the control module (2).
  2. Fig 2: Door Control Module
    GM754067Courtesy of GENERAL MOTORS CORP.
  3. Snap the door module (1) onto the mounting studs (2).
  4. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement or Front Side Door Trim Panel Replacement .
  5. Refer to Control Module References for programming and setup information.