lemon-mirror:
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L - Introduction >> Repair Instructions >> Ignition Coil Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Ignition Coils
    GM339300Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil to the bracket.
    2. Fig 2: View Of Ignition Coil Mounting Bolts
    GM344167Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the ignition coil mounting bolts.

    Tighten:  Tighten the ignition coil mounting bolts to 8 N.m (71 lb in).

    3. Fig 3: View Of Ignition Coil Harness Connector
    GM339299Courtesy of GENERAL MOTORS CORP.
  3. Connect the ignition coil harness connector.
    4. Fig 4: View Of Spark Plug Wires At Ignition Coil
    GM344169Courtesy of GENERAL MOTORS CORP.
  4. Connect the spark plug wires at the ignition coils.
· About lemon-mirror