lemon-mirror:
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - Repair Instructions >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Accelerator Pedal Position Sensor Electrical Connector
    GM1560064Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
    2. Fig 2: Accelerator Pedal Position Sensor
    GM1560065Courtesy of GENERAL MOTORS CORP.
  2. Remove the accelerator pedal/APP sensor nuts.
  3. Remove the accelerator pedal/APP sensor from the vehicle.
· About lemon-mirror