lemon-mirror:
Home >> Hyundai >> 1997 >> Sonata Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 2.0L >> Fuel System >> SFI Control Relay Test

SFI Control Relay Test

CAUTION: When applying direct battery voltage, ensure voltage is applied to correct terminal to prevent relay damage.
  1. Remove control relay. Relay is located behind right kick panel, near ECM. Apply battery voltage across terminals No. 6 (positive) and No. 8 (negative) while checking voltage on terminals No. 1 and 2. See Fig 1 . Battery voltage should exist.
  2. Apply battery voltage across terminals No. 7 (positive) and No. 10 (negative) while checking continuity between terminals No. 3 and 4. Continuity should exist. Apply battery voltage across terminals No. 3 (positive) and No. 9 (negative) while checking voltage at terminal No. 4. Battery voltage should exist. Replace relay if it fails any test.
Fig 1: Identifying SFI Control Relay Component Connector
G95J30964Courtesy of HYUNDAI MOTOR CO.
· About lemon-mirror