lemon-mirror:
Home >> Hyundai >> 2007 >> Elantra SE, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System & Switch >> Ignition System >> Ignition Switch >> Inspection

Ignition Switch: Inspection

  1. Disconnect the ignition switch connector and key warning switch connector from under the steering column.
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
    Fig 1: Identifying Ignition Switch Connector Terminals
    G00229411Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Ignition Switch Connector Continuity Reference Chart
    G04881702Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror