Charging System: Alternator: Disassembly

Remove the generator cover (A) using a screw driver (B).

Fig 1: Identifying Generator Cover And Driver
Courtesy of HYUNDAI MOTOR CO.
Remove the slip ring guide (A).
Loosen the mounting bolts (B) and disconnect the brush holder assembly (C).

Fig 2: Identifying Slip Ring Guide, Mounting Bolts And Brush Holder Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the rectifier (A) with 4 screw.

Fig 3: Identifying Rectifier With Screw
Courtesy of HYUNDAI MOTOR CO.
Remove the nut, pulley (A) and spacer.

Fig 4: Romoving/Installing Pulley, Spacer And Nut
Courtesy of HYUNDAI MOTOR CO.
Loosen the 4 nuts (A).

Fig 5: Identifying Rectifier Nuts
Courtesy of HYUNDAI MOTOR CO.
Disconnect the rotor (A) and cover (B).

Fig 6: Identifying Rotor And Cover
Courtesy of HYUNDAI MOTOR CO.
Reassembly is the reverse order of disassembly.