lemon-mirror:
Home >> Hyundai >> 2009 >> Accent GLS, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator >> Replacement

Charging System: Alternator: Replacement

  1. Disconnect the battery negative terminal first, then the positive terminal.
  2. Temporarily loosen the water pump pulley bolts.
    Fig 1: Identifying Water Pump Pulley Bolts
    G04801098Courtesy of HYUNDAI MOTOR CO.
  3. Remove the alternator drive belt (A), after loosening the adjusting bolt and mounting bolt. (Refer to step  9).
  4. Remove the power steering pump belt (B). (Refer to GENERAL (STEERING SYSTEM) ).
    Fig 2: Identifying Power Steering Pump Belt & Alternator Drive Belt
    G04801418Courtesy of HYUNDAI MOTOR CO.
  5. Remove the water pump pulley.
  6. Remove the power steering pump. (Refer to GENERAL (STEERING SYSTEM) - power steering pump).
  7. Remove the power steering pump bracket.
  8. Disconnect the alternator connector (A), and remove the cable (B) from alternator "B" terminal.
    Fig 3: Locating Alternator Connector & Cable
    G04801419Courtesy of HYUNDAI MOTOR CO.
  9. Remove the adjusting bolt (A) and mounting bolt (B).
  10. Remove the alternator brace (C).
  11. Pull out the through bolt (D) and then remove the alternator (E).
    Fig 4: Locating Adjusting Bolt, Alternator Brace & Mounting Bolt
    G04801420Courtesy of HYUNDAI MOTOR CO.
  12. Installation is the reverse order of removal.
  13. Pretighten the water pump pulley bolts.
  14. Adjust the power steering pump belt tension. (Refer to GENERAL (STEERING SYSTEM) - power steering pump).
  15. Adjust the alternator belt tension after installation.
  16. Tighten the water pump pulley bolts.
· About lemon-mirror