lemon-mirror:
Home >> Hyundai >> 2011 >> Accent GL >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the battery negative terminal first, then the positive terminal.
  2. Temporarily loosen the water pump pulley bolts.
    Fig 1: Loosening Water Pump Pulley Bolts
    G06879307Courtesy of HYUNDAI MOTOR CO.
  3. Remove the alternator drive belt (A), after loosening the adjusting bolt and mounting bolt. (Refer to step  9)
  4. Remove the power steering pump belt (B). (Refer to POWER STEERING PUMP )
    Fig 2: Identifying Alternator Drive And Power Steering Pump Belts
    G06879308Courtesy of HYUNDAI MOTOR CO.
  5. Remove the water pump pulley.
  6. Remove the power steering pump. (Refer to POWER STEERING PUMP )
  7. Remove the power steering pump bracket.
  8. Disconnect the alternator connector (A), and remove the cable (B) from alternator "B" terminal.
    Fig 3: Identifying Alternator Connector And Cable
    G06879309Courtesy of HYUNDAI MOTOR CO.
  9. Remove the adjusting bolt (A) and mounting bolt (B).
  10. Remove the alternator brace (C).
  11. Pull out the through bolt (D) and then remove the alternator (E).
    Fig 4: Identifying Alternator Adjusting, Mounting Bolt And Brace
    G06879310Courtesy of HYUNDAI MOTOR CO.
  12. Installation is the reverse order of removal.
  13. Pretighten the water pump pulley bolts.
  14. Adjust the power steering pump belt tension. (Refer to POWER STEERING PUMP )
  15. Adjust the alternator belt tension after installation.
  16. Tighten the water pump pulley bolts.
· About lemon-mirror