Repair procedures: Replacement

Remove the engine cover.
Remove the ignition coil with bolt.
Tightening torque:

7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

Fig 1: Identifying Ignition Coil With Bolts
Courtesy of HYUNDAI MOTOR CO.

NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

Fig 2: Pulling Lock Pin And Pushing Clip
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.