lemon-mirror:
Home >> Hyundai >> 2011 >> Equus Signature >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Relay >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Remove the fuse box cover.
  2. Remove the starter relay.
  3. Using an ohmmeter, check that there is continuity between each terminal.
    CONTINUITY REFERENCE CHART

    Terminal Continuity
    30 - 87 NO
    85 - 86 YES
  4. Apply 12V to terminal 85 and ground to terminal 86.

    Check for continuity between terminals 30 and 87.

    Fig 1: Identifying Starter Relay Connector Terminals
    G07309103Courtesy of HYUNDAI MOTOR CO.
  5. If there is no continuity, replace the starter relay.
  6. Install the starter relay.
  7. Install the fuse box cover.
· About lemon-mirror