lemon-mirror:
Home >> Hyundai >> 2011 >> Tucson GL, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> General Information (Engine Electrical System) >> Specifications >> Specification

General Information (Engine Electrical System): Specifications: Specification

Ignition System 

IGNITION SYSTEM SPECIFICATION CHART

Items Specification
Ignition coil Primary resistance 0.62 ± 10 % (Ω)
Secondary resistance 7.0 ± 15 % (kΩ)
Spark plugs Unleaded Type FK16HQR11
Gap 1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.)

Starting System 

STARTING SYSTEM SPECIFICATION CHART

Items Specification
Starter Rated voltage 12V, 1.2kW
No. of pinion teeth 11
No-load characteristics Voltage 11.5V
Ampere 90A, MAX
Speed 2, 600rpm, MIN

Charging System 

CHARGING SYSTEM SPECIFICATION CHART

Items Specification
2.0 2.4
Alternator Type Battery voltage sensing
Rate voltage 13.5 V, 110A
Speed in use 1, 000 ~ 18, 000 rpm
Voltage regulator IC regulator built-in type
Regulator setting voltage 14.4 ± 0.1V
Temperature compensation -3.5 ± 1mV / °C
Battery Type 48-23GL 54-26GL
Cold cranking amperage [at -18°C (-0.4°F)] 550A 600A
Reserve capacity 92min 110min
Specific gravity [at 25°C (77°F)] 1.280 ± 0.01
CAUTION:
  • COLD CRANKING AMPERAGE is the amperage a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2V or greater at a specified temperature.
  • RESERVE CAPACITY RATING is amount of time a battery can deliver 25A and maintain a minimum terminal voltage of 10.5V at 26.7°C (80.1°F).
Fig 1: Identifying Battery Level
G06873074Courtesy of HYUNDAI MOTOR CO.