lemon-mirror:
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Shift Lever >> Removal

Shift Lever: Removal

  1. Remove the shift lever knob (A).
    2. Fig 1: Identifying Shift Lever Knob
    G06136557Courtesy of HYUNDAI MOTOR CO.
  2. Remove the center console cover (A).
    3. Fig 2: Identifying Center Console Cover
    G06136558Courtesy of HYUNDAI MOTOR CO.
  3. Remove the center console, (refer to CONSOLE )
  4. Remove the shift cable assembly (B) by removing the clamp (A).
    5. Fig 3: Identifying Shift Cable Assembly And Clamp
    G05364296Courtesy of HYUNDAI MOTOR CO.
  5. Disconnect the interlock switch connector (A).
    6. Fig 4: Identifying Interlock Switch Connector
    G05364297Courtesy of HYUNDAI MOTOR CO.
  6. Remove the shift lever assembly (A).
    7. Fig 5: Identifying Shift Lever Assembly
    G05364298Courtesy of HYUNDAI MOTOR CO.
  7. Remove the retainer (A) and nuts (B).
    NOTE: In case, remove the crush pad and cowl cross bar. (refer to CRUSH PAD and HEATER UNIT )
    Fig 6: Identifying Retainer And Nuts
    G05364299Courtesy of HYUNDAI MOTOR CO.
  8. Remove the shift cable assembly from the transaxle (refer to REMOVAL ).
  9. Remove the shift cable assembly.
· About lemon-mirror