lemon-mirror:
Home >> Hyundai >> 2012 >> Tucson GL, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose. (Refer to INTAKE AND EXHAUST SYSTEM .)
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
    Fig 1: Identifying ETC Module Connector, Coolant Hoses And Bolts
    G06872188Courtesy of HYUNDAI MOTOR CO.
· About lemon-mirror