Roll Rod Bracket

Remove the engine room under cover.
Remove the roll rod bracket (A).
Tightening torque

Bolt (B):

107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)

Bolts (C):

49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb-ft)

Fig 1: Identifying Roll Rod Bracket And Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: Do not reuse: Bolt (B) (Loctited)
Install in the reverse order of removal.