lemon-mirror:
Home >> Hyundai >> 2014 >> Elantra Coupe Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Accelerator Position Sensor (APS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Accelerator Position Sensor Connector
    G10255752Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation bolt (B), the nuts (C) and then remove the accelerator pedal module.
    Fig 2: Accelerator Pedal Module Bolt
    G10255753Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Accelerator Pedal Module Nuts
    G10255754Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror