Repair Procedures: Removal

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the engine cover.
Remove the air cleaner assembly.
1. Remove the air duct (A).
2. Disconnect the breather hose (B).
3. Loosen the clamp (C) and then disconnect the air intake hose from the throttle body.
4. Remove the chamber air cleaner (D) and air cleaner assembly (E).
  
  Fig 1: Identifying Air Cleaner Assembly Components
  Courtesy of HYUNDAI MOTOR AMERICA
Turn the tensioner (B) clockwise and loosen, then remove the drive belt (A). Refer to REMOVAL AND INSTALLATION .

Fig 2: Removing Drive Belt
Courtesy of HYUNDAI MOTOR AMERICA
Remove the oil level gauge (A).

Fig 3: Identifying Oil Level Gauge
Courtesy of HYUNDAI MOTOR AMERICA
Remove the alternator.
1. Disconnect the alternator connector (A) and cable (B) from the 'B' terminal.
  
  Fig 4: Identifying Alternator Connector And Cable
  Courtesy of HYUNDAI MOTOR AMERICA
2. Loosen the alternator mounting bolts (A) and then remove alternator from the vehicle.
  
  Fig 5: Identifying Alternator Mounting Bolts
  Courtesy of HYUNDAI MOTOR AMERICA