Repair procedures: Removal

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Release the residual pressure in fuel line.
(Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Disconnect the fuel pressure control valve connector (A) and the fuel feed tube quick-connector (B).

Fig 1: Identifying Fuel Pressure Control Valve And Fuel Feed Tube Quick-Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the vapor hose (A) which is connected from the PCSV.

Fig 2: Identifying PCSV Vapor Hose
Courtesy of HYUNDAI MOTOR AMERICA
Remove the fuel tank.
(Refer to "FUEL TANK ")
Remove the mounting nuts (A) and then, remove the fuel & brake line protector (B).

Fig 3: Identifying Fuel And Brake Line Protector And Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the mounting nuts (A).
Remove the vapor tube line fixing clip (B) by using a common driver.

Fig 4: Identifying Vapor Tube Line Fixing Clip And Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the mounting bolt.
Remove the vapor tube and fuel tube line fixing clip (A) by using a common driver.

Fig 5: Identifying Vapor Tube And Fuel Tube Line Fixing Clip
Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: Identifying Vapor Tube And Fuel Tube Line Fixing Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the fuel line (A).

Fig 7: Identifying Fuel Line
Courtesy of HYUNDAI MOTOR AMERICA