lemon-mirror:
Home >> Hyundai >> 2014 >> Tucson GLS, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Front Wheel Transfer Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
    2. Smear and cover splines (B) with molybdenum type high pressure grease.

      TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT

      Fig 1: Identifying O-Ring With Cover Splines
      G09802595Courtesy of HYUNDAI MOTOR AMERICA
    3. Install the propeller shaft to be near runout marking (Transfer assembly 1 each, propeller shaft 1 each) each other.
      Fig 2: Identifying Propeller Shaft To Runout Marking
      G09802596Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror