lemon-mirror:
Home >> Hyundai >> 2014 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Non-Turbo >> ETC (Electronic Throttle Control) System >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to "INTAKE SYSTEM & EXHAUST SYSTEM - NON-TURBO ").
  3. Disconnect the ETC module connector (A).
    Fig 1: ETC Module Connector
    G08807012Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolts, and then remove the ETC module (A) from the engine.
    Fig 2: ETC Module
    G08807013Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror