lemon-mirror:
Home >> Hyundai >> 2015 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> ETC (Electronic Throttle Control) System >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to "INTAKE AND EXHAUST SYSTEM ").
  3. Disconnect the ETC module connector (A).
    Fig 1: ETC Module Connector
    G10362405Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the coolant hoses (A).
    Fig 2: Coolant Hoses
    G10362406Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the installation bolts, and then remove the ETC module (A) from the engine.
    Fig 3: ETC Module
    G10362407Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror