lemon-mirror:
Home >> Hyundai >> 2015 >> Elantra Coupe GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Switch Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver crash pad lower panel.

    (Refer to the "CRASH PAD ")

  3. Remove the steering column upper and lower shrouds.

    (Refer to the "CRASH PAD ")

  4. Remove the wiper switch.

    (Refer to the "MULTIFUNCTION SWITCH ")

  5. Remove the ignition switch after disconnecting the ignition switch 6-pin connector.
  6. Remove the key warning/immobilizer connector (A).
    Fig 1: Identifying Key Warning/Immobilizer Connector & Key Warning Switch And Key Illumination
    G10545984Courtesy of HYUNDAI MOTOR AMERICA
  7. After loosening the screw, remove the key warning switch and key Illumination (B).
  8. Pushing lock pin with key ACC.
  9. Remove the key lock cylinder (A).
    Fig 2: Identifying Key Lock Cylinder, Key Warning Switch And Key Illumination & Ignition Switch Connector
    G10545985Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror