Liftgate Switch

Disconnect the negative (-) battery terminal.
Remove the liftgate trim.
(Refer to the "LIFTGATE ")
Disconnect the connector. After loosening the liftgate garnish mounting nuts (13 EA), remove the liftgate garnish (A).

Fig 1: Identifying Liftgate Garnish
Courtesy of HYUNDAI MOTOR AMERICA
Remove the outside handle (A) after loosening the outside handle mounting screws.

Fig 2: Loosening Outside Handle Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Remove the other wiring connectors which connected with outside handle, then remove the liftgate switch assembly (A).

Fig 3: Identifying Liftgate Switch Assembly
Courtesy of HYUNDAI MOTOR AMERICA