Repair Procedures: Installation

Install the CVVT assembly.
Tightening torque:

64.7 ~ 76.5 N.m (6.6 ~ 7.8 kgf.m, 47.7 ~ 56.4 lb-ft)

Fig 1: CVVT Assembly
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- Install camshaft-inlet to dowel pin of CVVT assembly.
  At this time, attend not to be installed to oil hole of camshaft-inlet.
- Hold the hexagonal head wrench portion of the camshaft with a vise, and install the bolt and CVVT assembly.
- Do not rotate CVVT assembly when camshaft is installed to dowel pin of CVVT assembly.
1. LH exhaust CVVT
2. LH intake CVVT
  
  Fig 2: LH Exhaust And Intake CVVT
  Courtesy of HYUNDAI MOTOR AMERICA
3. RH intake CVVT
4. RH exhaust CVVT
  
  Fig 3: RH Exhaust And Intake CVVT
  Courtesy of HYUNDAI MOTOR AMERICA
NOTE: When installing the CVVT assembly bolt, prevent the camshaft from rotating by using a wrench at position A.

Fig 4: Identifying CVVT Assembly Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Install the timing chain.
(Refer to "TIMING CHAIN ")