lemon-mirror:
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Accelerator Pedal >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Accelerator Position Sensor Connector
    G10367575Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation nuts (B) and bolt (C), and then remove the accelerator pedal module.
    Fig 2: Accelerator Pedal Module Installation Bolt
    G10367576Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Accelerator Pedal Module Installation Nuts
G10367577Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror