lemon-mirror:
Home >> Hyundai >> 2016 >> Elantra Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.8L >> ETC (Electronic Throttle Control) System >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to "INTAKE & EXHAUST SYSTEM " in EM group).
  3. Disconnect the ETC module connector (A).
    Fig 1: Identifying ETC Module Connector
    G10537653Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
    Fig 2: Identifying Coolant Hoses
    G10537654Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror