lemon-mirror:
Home >> Hyundai >> 2016 >> Elantra Sport, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Refer to: "INTAKE & EXHAUST SYSTEM - 2.0L ").
  3. Disconnect the knock sensor connector (A).
  4. Remove the installation bolt (B), and then remove the sensor from the cylinder block.
Fig 1: Identifying Knock Sensor Connector And Installation Bolt
G10749882Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror